Waveshare LED-Display 5.83 600×448 ePaper Display HAT für Raspberry Pi

Übersicht This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Eigenschaften No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Spezifikationen Operating voltage: 3.3V Interface: SPI Outline dimension: 125.40mm × 99.50mm Display size: 118.80mm × 88.26mm Dot pitch: 0.198 × 0.197 Resolution: 600 × 448 Display color: black, white Grey level: 2 Full refresh time: 3.5s Refresh power: 26.4mW(typ.) Standby power: <,0.017mW Viewing angle: >,170° Interface SYMBOL DESCRIPTION VCC 3.3V GND Ground DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data/Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output, low active Lieferumfang 5.83inch e-Paper ePaper Driver HAT RPi screws pack (2 pcs.) PH2.0 20cm 8Pin Dokumentation / Downloads www.waveshare.com/wiki/5.83inch_e-Paper_HAT